Decorative High-Pressure Laminate (HPL Sheets)

Product Detail

Yantai MONCO Board Co.,Ltd is one of the most reliable decorative high-pressure laminate (hpl sheets) manufacturers and suppliers in China, welcome to get decorative high-pressure laminate (hpl sheets) made in China from us and check the quotation with us.

Basic Info

• Model NO.: 8001-

• Size: 1220*2440;1330*3050,1220*3660 or Other Size

• Surface: Matte,Glossy,Texture or Others

• Trademark: Maite

• Specification: 1, 220 x 2, 440mm

• HS Code: 3921909090

• Color: Xd-2503

• Thickness: 0.4-25.0mm

• Location: Qingdao,China

• Package: Refer to The Buyer

• Origin: Qingdao China

Product Description
About   Us
We are a professional manufacturer of high pressure laminates (HPL). with more than 15 years experience.Generally we have three types of HPL:single side decorative HPL,post forming HPL,double side compact HPL.
Profile:
1.Choose substrte glue and tooles with high quantity. The substrates usually available in the market  include blockboard,MDF,particleboard.ect. pay attention to the moisture content
And the smoothness of the substrates when choosing. Be sure the substrates are well sanded. The glue used should be good quality and with good adhesive strength. When
sutting the laminate, please use carbon steel tool and make all cuts from side color paper.
2.Evenly spread the glue on backside of the laminate and the surface of the substrate. If the surface is rugged and heavily water,absorbing, a second of glue is probably needed.
3,  Let the glue spread the glue on backside. Notice:volatilizing time differs according to season,weather and geographic area,please take practical experoence&working condition Into account and refet to the indication on the package of glue.
4,Carefully adhere the laminate onto the substrate. Notice:any air between laminate and substrate should be driven out using rolling or rag while pressing the laminate to the wubstrate. Make sure the glue is well distributed and there is no any air between laminate and substrate.
5.Trim the side and clean.

Applicable limitedecorative high pressure laminate
1, Used for indoor only, not suitable for adh ring cement,concrete wall and gypsum wallboard directly.
2, Non-structural materil should be adhered to suitable basis materil.
3, Non suitable to lay down at the place with temperature over as 135ºC and insolation at sunshine directly.


 
Size	Size	Notes :
1220*2440mm	4*8 ft	Standard sizes for all types of HPL , colors and finishes
1220*1830mm	4*6 ft	Available for matte , texture, glossy finishes
1310*2440mm	4.3*8 ft	Only available for texture and glossy finishes
1510*2440mm	5*8 ft	Only available for texture finish
1530*1830mm	5*6ft	Only available for texture finish

Enterprise Quality Standard
TEST ITEM	Standard stipulation by Q/320412 Ymm 001~2005
Wear resistance	305 cycles
Boiling water resistance	Surface:weight≤12%,thickness increase ≤12%
Cigarette buming eesistance	Level  2 and above
Cleanability	Level  3 and above
Dry heat resistance	Level  3 and above
Tension resistance	Mpa≥30
Surface standard	Refer tointernational  salable product
SOME WORDS TO YOU

Hopefully our brief introductions about products have helped you better understanding us. Please confirm with us more information listed above the products and the order quantity. If you need more specific information about products, please feel free to contact us.
Waiting for your early reply, and sincerely we hope to cooperate with you in the nearest future.